Horse Stall Door Guards

 Horse Stall Door Guards are versatile and functional. They can be used as the stall door or as an added barrier to the stall front, protecting the stall door if your horse has a habit of charging or pushing the door. All models are framed with heavy duty 3/16 x 1 1/2 hot rolled steel. Models CM 86 and CM 87 have sturdy 5/8" square steel tubing welded on 3" centers (2 3/8" opening allows for good ventilation).

Model CM 85 has solid 16 gauge steel. Slotted holes on the top and bottom of frames allow any combination of guards to be bolted together and used in either a left or right hand operation. A special spring loaded latch offers one hand operation and prevents the horse opening the door guard. Two piece hinge design offers easy removal of unit from the stall while unlatched, but cannot be lifted while latched. *TOUGH *ATTRACTIVE *FLEXIBLE

The Yoke set (Model CM 87) is 18" high while the guards (Models CM 85 & CM 86) are 24" high by 48" wide. Mounted on the inside of the doorway, the existing door does not need to be removed.

Model CM 86 Grill Door Guard measures 24" high by 48" wide. Latch and hinges are included. Order information below

Model CM 86 and CM 87 combination  shown. Measures 42" high by 48" wide. Order information below.

View Installation Instructions

 Possible Horse Stall Door Guard Combinations by Bolting Different Sections Together:

 (1) $143.00

 (2) $206.00

 (3) $286.00

 (4) $349.00

 (5) $143.00

 (6) $286.00

 (7) $349.00

 (8) $429.00

 (9) $206.00

 (10) $286.00

 (11) $349.00

 (12) $429.00

 Model CM 86 Grill Door Guard

$143.00

Questions? Call us at 800-335-1880!

 Model CM 85 Solid Door Guard

$143.00

Questions? Call us at 800-335-1880!

Model CM 87 Yoke Set 

$63.00

Questions? Call us at 800-335-1880!

Model CM 87SA Stand Alone Yoke Set

Many people want the option of adding a yoke set to an existing wooden stall door, this yoke set is designed for that purpose. This yoke set includes 2 each 24 inch long by 1 1/2 x 1 1/2 inch angle iron mounts to attach to your wood and 2 each model CM 87 Yokes measuring 18 inches high with 5/8 square bars welded on 3 inch centers. (2 3/8 inch openings between bars. Designed to fit any thickness stall door. Eliminates chewing and reaching around on wooden doors. Can be cut down to fit doors narrower than 48 inches in width. Mounting hardware is included. Black Enamel finish.

$90.00

Click Here to Return to the Top of the Page