Horse Stalls
Home Modular Horse Stalls Horse Stall Kits Dutch Doors Stall Door Guards Feed & Water Stall Accessories Tractor & ATV Equip. About Us Contact Us Customer Photo Gallery

Horse Feeders and Watering Units for Horse Stalls

swing out hay and grain horse feeders

Imagine how much time you would save being able to Hay, Grain, and Water your horse without having to enter the stall. Our swing out combination feeder and utility door units can upgrade your horse stall system appearance and versatility at minimal cost and effort.

swingout utlity door for horse stalls

Save tons of time and labor with our uniquely designed swing out utility door. Made of heavy duty 1/8" steel plate mounted on a sturdy angle iron frame. Measures 22" H x 20" W. Designed to accommodate a wide variety of feeders, buckets, bucket holders, or our Thermo Bucket. Heavy duty latch is designed so that the door cannot be opened from the inside. Can be installed to swing out from the left or right by simply inverting the frame.

Shipping wt 30 lbs. View Installation Instructions

Steel Swing Out Utility Door. Model CM 122

(Door shown with mounted Thermo Bucket not included) Paint color black. Questions? Call 800-335-1880

$115.00

Black Painted Steel Thermo-Bucket Model TB-1

Keeps your horse’s water from freezing for 6-12 hours without electricity!

(Shown with Utility Door not included) Paint color black.

$105.00

Swing Out Combination Feeders

The feeder is pivoted on a sturdy angle iron frame that is symmetrically designed so it can be used on either the left or right hand side of the stall by simply inverting the frame. The feeder is constructed of heavy duty 16 gauge hot rolled steel with a removable polyethylene feed pan and 1/4" rod trimming on all exposed edges to eliminate sharp edges. The internal hay rack is welded 7/16" hot rolled steel rod. Measures 37" H x 22" W.

Shipping wt. 62 lbs. View Installation Instructions

Steel Swing Out Combination Feeder

Model CM 121 (Paint color black)

$219.00

Questions? Call us at 1-800-335-1880

swingout combination horse feeder

Aluminum units are made of corrosion resistant aluminum, with a removable polyethylene feed pan. Dimensions are the same as steel units. Aluminum  provides all of the benefits of above steel units plus, the benefits of maintenance and corrosion free aluminum.

horse stall utility doors

Swing Out Horse Stall Utility Door

Aluminum Model CM 222

$190.00

watering buckets for horses

Thermo Buckets. Keeps your water from freezing WITHOUT electricity!

Aluminum Model TB 2

$159.00

horse stall feeders

Swing Out Combination Hay & Grain Feeder

Aluminum Model CM 221

$350.00

Galvanized Model TB 3

$119.00

Hay Racks

wall mount hay rack

Wall Model Hay Rack Model CM 212.

• Top opening is 2 feet wide x 1 foot deep. Unit is 2 feet high.

• Open space between bars for safety.

• Four corner mounting for rigidity.

• All steel welded construction using 7/16" hot rolled steel. (color black)

$45.00

horse feeder corner mount hay rack

Combination Feeder Model CM 2125.

One feeder for both jobs - hay and grain

• For the corral or stall.

• Hang onto your fence or trailer, or mount on your stall wall.

• 2 ft. wide x 1 ft. deep x 2 1/2 ft. high. Holds a bunch of hay and 5 gallons of grain.

• No wasted hay! Falls into tray.

• Rugged 16 gauge steel with heavy steel hay bars.

• Removable hangers are made to withstand the punishment of horses.

$125.00

Corner Model Hay Rack Model CM 213

Maximize stall Space with this heavy  duty Hay Rack

• Rugged welded construction

• All steel welded construction using 7/16" hot rolled steel.

• Big 30 inch opening at top, tapered to 16 inches at bottom. (color black).

$45.00

Rugged Cast Aluminum Horse Grain Feeders  High Strength - No Corrosion Lifetime Horse Feeders

Cast Aluminum Feeders

Extremely heavy duty cast aluminum provides the toughest structure, yet is light in weight. You get both the advantages of plastic (corrosion prevention) and steel (high strength) with cast aluminum. With horses and other live stock, RUGGED CONSTRUCTION is a must. Both feeders have spherical shaped bottoms which causes the feed to flow to a single low point allowing easy clean up by the animal. If you have grown tired of constantly replacing the rubber and plastic feeders, here is the one-time solution!

cast corner feeder

CM 34 Corner Feeder

• Holds up to 3 gallons

• Four point mounting

• Each mounting surface is 16 in. long with a depth of 6 in.

• Weight approximately 11 lbs.

$115.00

cast wall feeder

CM 33 Flat Wall Feeder

• Holds up to 3 gallons

• Three point mounting for stability

• 20 in. wide at rear x 6 in. deep x 12 in. front to back.

• Weight approximately 13 lbs.

$115.00

feed saver lid corner feeder

CM 34L Feed Saver Lid for Corner Feeders

Cast feeder shown NOT included

Stops the annoying and the wasteful habit some horses have of slinging their grain out of the feeder and onto the floor! The center opening is 5 3/4" wide. The steel bars are welded in place onto the heavy steel frame. Each Feed Saver Lid comes with 2 hold down brackets to attach to the feeder mounting hardware, but allows for easy cleaning. Designed to fit our cast aluminum corner feeders only.

$19.00

feed saver lid wall feeder

CM 33L Feed Saver Lid for Wall Feeders

Cast feeder shown NOT included

Stops the annoying and the wasteful habit some horses have of slinging their grain out of the feeder and onto the floor! The center opening is 6" wide. The steel bars are welded in place onto the heavy steel frame. Each Feed Saver Lid comes with 2 hold down brackets to attach to the feeder mounting hardware, but allows for easy cleaning. Designed to fit our cast aluminum wall feeders only.

$19.00

Cast Aluminum Mineral Block Holders

Both Mineral Holders have the same basic heavy duty design to accept either one, or two, standard blocks of salt or mineral. Two mounting holes are located to provide rigid mounting and protect against either upward or downward force that may occur. The double block holder dimensions are approximately 10 in. x 7 in. x 3 in. and the single holder 5 in. x 7 in. x 3 in.

Single Block Mineral Holder CM 35

• Weight approximately 3 lbs.

$35.00

Double Block Mineral Holder CM 36

• Weight approximately 5 lbs.

$45.00

single mineral block holder double mineral block holder

Click Here to Return to the Top of the Page