*Some items on this page have a minimum order requirement for free shipping.
Aluminum Horse Stall Doors & Aluminum Stall Grill Units The Same Appearance for Years! Strong and attractive anodized (hard protective coating) aluminum horse stalls provide the ultimate in luxury, style, and corrosion prevention. NO-WELD CONSTRUCTION! Superior Strength over non-coated aluminum stalls!
• Maintenance Free
Using the 4 ft. sections, any size stalls can be built (8 ft.,10 ft., 12 ft).
Also, odd sizes can easily be cut with a standard hacksaw.
Example: a 12 ft. stall front would require 2 each 4 ft. Sections and 1 each 4 x 7 door frame.
Removable side stall walls can be made using our 7 ft. long wall channels
The 29 inch tube height allows for 10 each 2 x 6 boards below the grill work. The top and bottom grill channels are designed to fit over standard 2 inch (1 1/2 inch thick) construction lumber. The door frame uses the same grill, but also includes two vertical side channels that attach to ten lower boards and one board above the grill.
The 4 ft. wide sections feature 1 inch diameter tubes inserted on 4 inch centers (3" opening).
Our Aluminum stall components are manufactured with a hard anodized coating. This hard protective coating provides a superior finish over raw aluminum and does not produce the "white rust" that many other aluminum horse stalls show over time.
Typical Requirements for 12' Stall Front
1 ea CM 22 Standard Grill
1 ea CM 23 Grill with Opening or CM 22 Standard Grill
1 ea CM 20 Door Frame Assembly
1 ea CM 84 Door Hardware Kit
Typical Requirements for 10' Stall Front
Same as 12 ft. except 1 ea CM 22 custom to 2 ft.
Side Wall Partitions
2 ea CM 24 Wall Channels for each partition.
Use CM 22 for ventilated partitions.
(Use 3 Units for 12' Wall).
Aluminum Standard Stall Packages
Stall Packages- Stall Fronts
No Lumber is Included
Includes: door frame, sliding door hardware and your choice: CM22 Grill Sections or CM23 Grills w/feed opening.
(Solid Side or Back Walls Require 2 ea. CM24 Wall Channels) - $70.00
Note: All channels are designed to accept standard 2" lumber (1 1/2" thick). NO LUMBER IS INCLUDED.
Order the Aluminum Stall Components You Need Below to Customize the Stall to YOUR NEEDS!
Horse Stall Door (4 ft. x 7 ft.) CM 20 (anodized aluminum framework only, lumber not included) 4 ft. wide grill is 29" high x 1" round tubes inserted, on 4" centers, into channels top & bottom. Tubes free-float in the channels for easy replacement and our no-weld construction provides superior corrosion resistance. (door latch and top brackets not included, see sliding door hardware kit below)
Horse Stall Door CM20H with Swingout Section- The same great features as our CM20 shown to the left, but this door features a swing out section for a "gossip door". The opening can positioned in the center or offset to either side. The opening will be 19" wide when open and can be locked back with the spring-loaded latch.
Horse Stall Grill (4 ft. Section) CM 22. 4 ft. wide grill is 29" high x 1" round tubes inserted, on 4" centers, into channels top & bottom. Tubes free-float in the channels for easy replacement and our no-weld construction provides superior corrosion resistance.
Horse Stall Grill w/Feed Opening CM 23. 4 ft. wide grill is 29" high x 1" round tubes inserted, on 4" centers, into channels top & bottom. Tubes free-float in the channels for easy replacement and our no-weld construction provides superior corrosion resistance. This grill has a feed opening measuring 10 inches x 10 inches.
Horse Stall Grill w/Hinged Section CM 22H. 4 ft grill section with a swing-out section allows you to create a gossip door or a swing-out feed door. Tubes free-float on the assembly for easy replacement and our no-weld construction provides superior corrosion resistance. Just attach the brackets to your lumber top and bottom. Spring loaded latch locks swing section in place open or closed.
7 ft. long wall channel CM24. Removable side stall walls can be made using our 7 ft. long wall channel designed to accept standard 2 inch lumber (1 1/2 inch thick). Attach the wall channels to your support posts or walls and slide the lumber into the channels. Measures 7 ft. long x 1 3/4" wide x 2 3/4" deep.
Sliding Door Hardware Kit CM 84. Consists of door brackets, door latch, bottom stay roller assembly, polyethylene roller system for long life and 8 ft section of enclosed-top track to keep dust and material from falling into the rollers and jamming your door. (for aluminum stall doors, the bottom stay roller is hidden in the bottom door track)